Luminlay line material for fretless

After several years of trial and error, we have finally completed Luminlay's fret line material.
The fretline material used for the fretless base is extremely thin and requires precision, so it was impossible to mold it using Luminlay's highly concentrated phosphorescent material. This time, we have managed to commercialize it using our own special processing. Luminlay fretline material has poor yields (75% of the material is wasted during processing), is thin and brittle, has a high reject rate, and is considerably more expensive than regular Luminlay products. However, we were able to commercialize it because of the persistent needs of our customers. We are confident in our quality. The glow-in-the-dark fret lines are spectacular. Please try it once.
For both blue and green luminescence, the unique greenish color of luminous pigments has been removed to make them more compatible with fingerboard materials, and the size is compatible with multi-string basses. Both sides painted white.

XBFL-050 (blue light emitting, for fret groove width 0.5mm, 83mm*5mm*12 pieces, 95mm*5mm*12 pieces 9,200 yen/set　
XBFL-060 (blue light emitting, for fret groove width 0.6mm, 83mm*5mm*12 pieces, 95mm*5mm*12 pieces 9,200 yen/set
VGFL-050 (green light emitting, for fret groove width 0.5mm, 83mm*5mm*12 pieces, 95mm*5mm*12 pieces, 9,200 yen/set
VGFL-060 (green light emitting, for fret groove width 0.6mm, 83mm*5mm*12 pieces, 95mm*5mm*12 pieces 9,200 yen/set

(How to use) Glue with transparent epoxy adhesive to the fingerboard that already has fret grooves (straight bottom surface). Do not wipe off any epoxy that protrudes around the fret lines. After hardening, scrape the surface little by little with sanding paper to expose the surface. The protruding epoxy will break and prevent chipping.